Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

speedometer

Oil service reset SLK – Class

1998-1999
*Diagnostic Reset Tool Required
Manual Reset:

1. Turn key in steering lock to position 2.
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays
4. Press and hold button (1)
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
2000-2001
*Diagnostic Reset Tool Required

Manual Reset:

1. Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds
3. Press and hold button to the left of speedometer
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

2002-2004
1. Switch ignition on and immediately press knob to left of speedometer twice within 1 second.
2. Present status for days or distance is now displayed. Within 10 seconds
3. Press and hold button to the left of speedometer
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

2005-2009
1. Turn the ignition to position 1.
2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.)
3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times. The battery voltage will be displayed.
4. Press the up or down buttons until the service menu appears.
5. Use the +/- buttons to select menu oprion “”CONFIRM””.”
6. Press the system selection button uuntil “”COMPLETE SERVICE”” is selected.”
7. Confirm “”Complete Service”” with system selection button. The display will show “”SERVICE CONFIRMED””.”
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

2010-2012
1. Turn the ignition to position 1. (close all doors
2. Press the scroll forward button (bottom button on left side of steering wheel controls) to display mileage counter.
3. Press the system selection button (left button on left side of steering wheel controls) repeatedly until the menu item “”trip”” with highlighter is displayed. “”Trip”” remains selected for 5 seconds so move quickly to step 4.”
4. Press and hold accept/end phone button and within 1 second press and hold the button in the center of the arrows (left side of steering wheel). In 5 seconds the Workshop menu will be displayed “”Vehicle data
5. Use scroll forward or backward to highlight “”ASSYST PLUS”” and confirm selection using the button in the center of the arrows. “”Service data”” and “”Full service”” appear in the display.”
6. Use scroll forward or backward to select “”Full service”” and confirm selection with the button in the center of the arrows. The display will show “”Service 1
7. Use scroll forward or backward to select “”Confirm serv”” and confirm selection with the button in the center of the arrows.”
8. Use scroll forward or backward to select engine oil specification used. “”Oil qual. 229.3″” and “”Oil qual. 229.5″” are displayed. Confirm selection with center button. The display shows “”Serv conducted?”””
9. Use scroll forward or backward to select “”Yes”” and confirm with center button. Display will show “”Take-back not possible
10. Use scroll forward or backward until “”Configuration”” is highlighted and confirm selection with button in center of the arrows. “”Full service carried out”” appears in the display.”
11. Use scroll forward and backward to exit menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.

RESET SERVICE LIGHT SKODA OCTAVIA 2

Reset service light Skoda Octavia 2, 2004, 2005, 2006, 2007

1. Switch off the ignition and press the reset knob of the trip counter below the speedometer and hold.

2. Switch on the ignition and release the reset button, one of the service events appear in the display.

3. It is possible to switch between the the readouts of the service events by briefly pressing the reset button.

4. When the particular service event is displayed, turn the button for setting the digital clock to the right, service appears in the display.

5. Switch off the ignition. Only now is the service event reset.

RESET SERVICE INDICATOR SEAT AROSA

Hot to reset service light on a Seat Arosa

The SEAT owners manual for the Arosa states.

With the ignition switched off, press and hold the trip meter reset button below the speedometer.

Then, switch the ignition on and hold the reset button for atleast 10 sconds.

Dashes will then appear in the display.

The service has been reset.

Service Light Reset – Renault Laguna

The reset button is located under the speedometer on the instrument cluster.

Switch ignition on.

Press reset button until “spanner” symbol flashes.

Keep button depressed until “spanner” symbol stops flashing and remains illuminated.

Indicator shows appropriate service interval.

Release reset button.

Switch ignition off.

Some vehicles are fitted with a ‘SERV’ lamp – this is not a service interval indicator lamp, it is a malfunction indicator lamp (MIL)

Reset the SLK 230 for an Oil Change

The Mercedes-Benz SLK 230 features an engine oil-life tracking system as part of the car’s computer. The computer monitors driving habits and engine conditions to determine when the oil needs to be changed. The control panel displays a reminder when the car needs an oil change. In order for the computer system to work correctly to predict the next oil change, reset the light following an oil service.

1. Insert the key in the ignition. Turn the key to position “2.”

2. Press the adjust button twice within one second. The adjust button is located below the speedometer.

3. Turn the ignition off.

4. Press and hold the adjust button. Turn the ignition to position “2.”

5.Release the adjust button after a signal sounds and the service indicator resets visibly.

Categories


Copyright © 2013. All Rights Reserved.