Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

screen

Oil service reset NISSAN GT-R

2009-2011

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (?) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (?) to select.
2. Use the NEXT button (?) to select MAINTENANCE
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Bentley Continental Fluying Spur service display reset 2004 –

The real repair is to have the vehicle serviced by a Bentley dealer. The other option is as follows…
Press and hold the trip button
While doing this, turn the ignition key into the on position
Let go of both, and you will see the words “service reset” on the drivers instrument panel screen
Now press the silver knurled roller switch “OK” on the right side of the steering wheel controls, by the menu button. This will confirm the request.

Reset service light 2003 Bentley Continental GT

With the ignition key off, press and hold the trip button
while doing this, turn the ignition key to the on position
The driver’s instrument panel screen will now read “service reset.”
Now press the silver knurled knob on the right side of the steering wheel controls, this will confirm the operation.

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go. This will reset your miles to service to the factory setting and get rid of the flashing spanner!

Renault Laguna 2 service light reset

With the ignition on, Press the end of the wiper stalk until miles to service appears on the dash screen.

Now, press and hold the mileage reset button on the instrument binnacle for more than 5 seconds, it will start to flash. Let go

This will reset your miles to service to the factorysetting and get rid of the flashing spanner !

Hope this helps a few people.

Categories


Copyright © 2013. All Rights Reserved.