Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

power switch

Service oil reset Toyota Highlander

2005-2008
Turn the ignition to run (one position before starting engine).
Ensure odometer reading is shown. Turn ignition off.
While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009-2010
Vehicles without smart key system:
Turn the ignition to run (one position before starting engine).
Ensure Trip Metre A reading is shown. Turn the ignition off.
Vehicles with smart key system:
Press the “ENGINE START STOP” switch once (do not start engine).
Ensure Trip Metre A reading is shown. Turn the ignition off.
While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
Without multi-information display: Continue to press and hold the button until the trip meter displays ě000000î.
With multi-information display: Continue to press and hold the button until “COMPLETE” appears on the multi-information display.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Hybrid
Press the “POWER” switch once (do not start engine).
Turn off the hybrid system with the trip meter A reading shown.
Ensure Trip Metre A reading is shown. Turn the ignition off.
While holding down the trip meter reset knob the ěPOWERî switch must be set in ON mode (do not start engine). A message ěCOMPLETE” will appear on the multi information display.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Toyota Camry

2005-2008
Turn the ignition to run (one position before starting engine).
Ensure odometer reading is shown. Turn ignition off.
While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light goes off. If the system fails to reset, the light will continue flashing.
Turn the ignition off and then start the engine to verify the indicator has been reset.
2009
Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine).
Ensure Trip Metre A reading is shown. Turn the ignition off.
While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine) or turn ignition to run (one position before starting engine).
Continue to press and hold the button until the trip meter displays “000000”.
Turn the ignition off and then start the engine to verify the indicator has been reset.
Camry/Hybrid
2010
Press the “ENGINE START STOP” switch once (do not start engine).
Ensure Trip Metre A reading is shown. Turn the ignition off.
While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
Without multi-information display
4. Continue to press and hold the knob until the trip meter displays “000000”.
With multi-information display
4. Continue to press and hold the knob until ěCOMPLETEî appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Hybrid
Press the “POWER” switch once (do not start engine).
Turn off the hybrid system with the trip meter A reading shown.
Ensure Trip Metre A reading is shown. Turn the ignition off.
While holding down the trip meter reset knob the ěPOWERî switch must be set in ON mode (do not start engine). A message ěOIL MILEAGE RESET MODE” will appear on the display.
Hold down the knob for at least 5 seconds. A message ěCOMPLETEî will appear and the message ěOIL MILEAGE RESET MODE” goes off.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Lexus HS250H

2010
Start the engine/hybrid system.
Switch the display to the trip meter ěAî when the hybrid system is operating. Turn the engine/hybrid system off.
While pressing the trip meter reset button, turn the ěPOWERî switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays ě000000î and the multi-information display indicates that the reset is complete.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Categories


Copyright © 2013. All Rights Reserved.