Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

information

Oil service reset NISSAN GT-R

2009-2011

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (?) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (?) to select.
2. Use the NEXT button (?) to select MAINTENANCE
i) SETTING > MAINTENANCE > OIL > ENGINE OIL to set or reset the mileage for the engine oil change.
ii) SETTING > MAINTENANCE > FILTER > to set or reset the mileage for the engine oil filter.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

Mondeo Focus Transit Service Light Reset

Do you own a MK4 Mondeo, New Shape Transit or MK2 face lift Focus?

Do you do your own servicing or have had it serviced and still have the oil service light on?

Here are the instructions to switch off the service light:

THIS INFORMATION IS ONLY TO BE USED AFTER YOUR VEHICLE HAS BEEN SERVICED.

Turn the ignition on (engine not running but dash lights illuminated).

Turn the ignition off.

Press down both the Accelerator (Throttle) and Brake peddles.

Turn the ignition on (engine not running but dash lights illuminated).

Keep both the Accelerator (Throttle) and Brake peddles held down for between 15 and 30 seconds.

Turn off ignition.

Release peddles.

Turn the ignition on (engine not running but dash lights illuminated).

Your service light should now be out.

Reset service light, maintance on Toyota Avensis

How can you reset service light, maintance on Toyota Avensis

1. Set the multi-information display to TRIP A.

2. Turn the ignition switch off.

3. Press and hold the ODO / TRIP switch, and turn the ignition switch on (IG).

4. After turning the ignition switch on (IG), keep holding the switch for at least 5 seconds.

Citroen Xsara Picasso Service Light Reset

How to Reset the Service Light Citroen Xsara Picasso

Recently I have had a few requests for Citroen Xsara Picasso Service Light Reset information from people who service their own vehicles.

Being a mobile mechanic and auto diagnostic specialist I could use the stock answer and say “I’ll have to plug it in for you”.

As you have no doubt seen through my other posts I do not believe in making things difficult for the home mechanic.
Here is the procedure:

Sit in drivers seat ignition off and handbrake applied.

Press and hold trip reset button.

Turn key to position two (ignition lights on engine not started).

Keeping the trip reset button pressed in you will notice your trip meter counting down.

When zero (0) is reached start the car and the service light (spanner symbol) should now be extinguished.

Please only use this information after your vehicle has been serviced

Categories





Copyright © 2013. All Rights Reserved.