Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

info button

Oil service reset Pontiac Solstice

2006-2010

Turn the ignition to run (one position before starting engine).
Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset Pontiac G5

2007-2010

Turn the ignition to run (one position before starting engine).
Press the INFO and RESET (arrow) buttons on the DIC at the same time to enter the personalization menu.
Press the INFO button to scroll through the menu until OIL LIFE RESET is displayed.
Press and hold the RESET button until the DIC display shows ACKNOWLEDGED. This will tell you the system has been reset.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Nissan Pathfinder

2006-2007
Turn the ignition to run (one position before starting engine).
When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button.
When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1
Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010
Turn the ignition to run (one position before starting engine).
Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
Select one of the Reminder (1 – 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the NISSAN contoller.
Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Infiniti QX56

2004-2007
Turn the ignition to run (one position before starting engine).
Push the ěTRIPî button repeatedly to display “MAINTENANCE” and press the “ENTER” button.
Select “Engine Oil” and press the “ENTER” button.
Select “RESET” and press “ENTER” button.
Press “PREV” to return to previous menu.
Turn the ignition off and then start the engine to verify the indicator has been reset.

2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Push the ěINFOî button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Reminder 1” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “Back” button to return to “Maintenance” menu and repeat procedure for “Reminder 2″… Turn the ignition off and then start the engine to verify the indicator has been reset.

Service oil reset Infiniti M Series

2003-2004
Turn the ignition to run (one position before starting engine).
Push the “INFO” button on the control panel for the Vehicle Information screen.
Choose “Maintenance” using the joystick and push the “ENTER” button.
Select “Engine Oil” and press “ENTER” button.
Select “Reset” and press “ENTER” button.
Press “PREV” button to return to “Maintenance” menu and repeat procedure for “Oil Filter”. Turn the ignition off and then start the engine to verify the indicator has been reset.
2006-2007
Turn the ignition to run (one position before starting engine).
Push the “INFO” button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Engine Oil” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “BACK” button to return to “Maintenance” menu and repeat procedure for “Oil Filter”. Turn the ignition off and then start the engine to verify the indicator has been reset.
2008-2010
Turn the ignition on without starting the engine (press START/STOP) button.
Push the “INFO” button on the control panel for the Vehicle Information screen.
Use arrow keys to scroll down to “Maintenance” and press “ENTER” button to select.
Select “Reminder 1” and press “ENTER” button.
Select “Reset Distance” and press “ENTER” button.
Press “Back” button to return to “Maintenance” menu and repeat procedure for “Reminder 2″… Turn the ignition off and then start the engine to verify the indicator has been reset.

Categories


Copyright © 2013. All Rights Reserved.