Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

Audi

Oil Service Reset Audi TT

2000-2004
*Diagnostic Reset Tool Required

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

Manual Reset for 2000 only:

1. Turn off the ignition.
2. Press and hold the TRIP RECORDER reset button on the instrument cluster and turn on the ignition.
3. Release the button. The display will show SERVICE IN —MI or SERVICE.
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.
2005-2007
1. Turn off the ignition.
2. Press and hold the button to the right of the LCD display in the instrument cluster.
3.Turn the ignition on (do not start the engine); the message “”SERVICE”” appears. Release button.”
4. Within 5 seconds
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

2008-2012
“Audi recommends the use of a reset tool. *Depening on model

Oil Service Reset Audi Allroad

2001-2005
Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Locate the reset buttons (WRENCH button and 0
4. Do the following to display the SERVICE! Message in the DIS:
i) Press and hold the Wrench button.
ii) Turn on the ignition – do not start the engine.
iii) Release the WRENCH button.
5. Do the following to display the next service interval (SERVICE in ##MI)
i) Press and hold the 0
ii) Release the 0
6. Turn off the ignition.
7. Start the engine and verify indicator has been reset.

Manual Reset using DIS and Reset Knobs:

1. Turn off the ignition
2. Locate the Driver Information System (DIS) in the instrument panel.
3. Do the following to display the SERVICE! message in the display.
i) Press and hold the right RESET knob.
ii) Turn on the ignition – do not start the engine.
iii) Release the knob.
4. Do the following to display the next service interval (SERVICE IN ##MI)
i) Press and hold the right RESET knob.
ii) Release the knob.
5. Turn off the ignition.
6. Start the engine and verify indicator has been reset.

service light reset Audi A3 (1996-1999), A4 (1994-2001), A6 (1996-2000)

If the service is due on these vehicles, when the key is turned to position 2, one of the dashboard displays will show “Service INSP”, “INSP1” or “INSP2” for Fixed interval services, and “SERVICE OEL / OIL” for the Oil Service interval.
The oil service reset procedure is as follows:
Start with the ignition turned OFF
Press and hold the button on the right side of the display while turning the ignition on (position 2)
“Service OEL / OIL” should be displayed
Release the button on the right
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left

…then to access and reset the service information:

Push the button on the right briefly
“Service INSP” should show on the dash
Pull out the button on the left side of the display until the service prompt is cleared
The display should now read —
Release the button on the left
Turn off the ignition

Categories


Copyright © 2013. All Rights Reserved.