Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

ASSYST

Oil service reset SLS – Class

2010-2012

1. Turn the ignition to position 1. (close all doors
2. Press the system selection button (left button on left steering wheel controls) repeatedly until the kilometer reading is shown in the multi information display.)
3. Press the system selection button (located on the far left of the steering wheel) repeatedly until the menu item “”trip”” with highlighter is stored in the multi-function display. *Trip remains selected for 5 seconds so you need to move to step 4.”
4. First press and hold the accept phone call button and within 1 second also press and hold the OK button for 5 seconds. The workshop menu will appear in the display showing “”vehicle data
5. Press the scroll forward button (lower button on left steering wheel controls) to highlight “”ASSYST PLUS”” and then confirm by pressing OK button.”
6. Press scroll forward button (lower button on left steering wheel controls) to highlight “”Full Service”” and then confirm by pressing OK button.”
7. Press scroll forward button until “”YES”” is highlighted and confirm swith OK button. “”No take-back possible”” appears.”
8. Press scroll forward button until “”Confirmation”” is highlighted and confirm with OK button. “”Full service carried out”” appears.”
9. Press OK button and back button (standalone button on left steering wheel controls) repeatedly until the menus are exited.
10. Turn the ignition off and then start the engine to verify the indicator has been reset.

Oil service reset GLK – Class

2009-2011

1. Turn the ignition to position 1. Ensure mileage is displayed.
2. Press the left arrow repeatedly until the TRIP option is highlighted.
3. Press and hold (phone) button and within 1 second press OK and then hold both buttons for 5 seconds. The shop menu is displayed.
4. Press down repeatedly until “”ASSYST PLUS”” is highlighted and confirm with OK. ”
5. Use the down arrow to select “”FULL SERVICE”” and then confirm with OK. Use the down arrow to select YES and confirm with OK. “”CANNOT BE UNDONE”” displays. Use the down arrow to select CONFIRM and then confirm with OK. The display reads “”FULL SERVICE CARRIED OUT””. Confirm by pressing OK.”
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Categories


Copyright © 2013. All Rights Reserved.