Find how to reset any maintenance light or reset oil life after an oil change for all makes and models.

Range Rover

How to reset oil change light indicator reset maintenance light without using a computer for Range Rover

Reset the Range Rover Airbag Fault Code

Instructions

1. Open the hood and loosen the retaining nut on the cable clamp running to the negative battery terminal.

2. Slide the clamp off of the negative battery terminal.

3. Wait 1 minute for the Range Rover’s electronic control module to cycle and reset. Then, reconnect the clamp to the negative battery terminal.

4. Tighten the retaining nut on the cable clamp. The airbag light should go out at this point. When it does, you’ll know that the fault code has been erased.

How do you How do you reset the service reminder indicator light on a 2007 range rover sport?

turn off the car’s ignition.

Hold down the reset button on the dash board to zero the mileage.

keep it held in.

turn the car’s ignition on – but do not start.

keep the button in for 5 seconds.

a menu will come up – like date/mileage.

let go and then press the button again.

it will toggle through some options – then get to ‘rst’

press the button again, and your done

Categories





Copyright © 2013. All Rights Reserved.