Opel / Vauxhall
How to reset oil change light indicator reset maintenance light without using a computer for Opel / Vauxhall
How to reset oil change light indicator reset maintenance light without using a computer for Opel / Vauxhall
This procedure is for the Vauxhall Zafira A Service (INSP) Light Reset
With your left hand press and hold the trip reset button.
With your right hand insert key into the ignition.
Turn key to position “II” ignition lights on engine NOT started.
Keeping the trip reset button pressed you will see “INSP” and after a while “_ _ _” will be displayed.
Turn key to the “OFF” position thn release the trip reset button.
Turn key to position “II” ignition lights on engine NOT started.
That completes the service light reset for the Vauxhall Zafira A.
R P SERVICES would like to state that this process should only be used after the vehicle has been serviced.
There’s no great ”trade secret” as to how to reset the service indicator lamp on most Vauxhall’s, simply refer to pages in the Owner’s Handbook!
For reference of those interested in such matters, but who might not have access to an owner’s manual, this is the procedure to follow:
Vauxhall service reset
Turn Ignition Off
Hold Trip Reset In
Turn Ignition On Still Holding
Trip Reset wait for three dashes
Turn off Ignition
Turn on Ignition to confirm
To the best of my knowledge, the above service light reset procedure applicable to most Vauxhalls
Considering it’s made by a GM company, I would assume the standard practice here works there…
Turn key to on, but do not start…
Pump gas peddle three times…
Press and hold brake peddle till the service light blinks and then goes out…
Start the car to make sure the light was reset…
Or…
Turn to on…
Hold trip reset button…
Start car
keep holding trip reset till the light on the dash goes out…
Hopefully one of those works, but they’re just kinda the ‘try this’ until someone who knows chimes in.
Is there a way to reset the service light on a 55 plate Vauxhall Signum 1.9 cdti design without going to a VX Dealer
· Turn Ignition Off
· Hold Trip Reset In
· Turn Ignition On
· Still Holding Trip Reset wait for three dashes
· Turn off Ignition
Turn on Ignition to confirm
Start with key in but Ignition OFF
Press and hold Trip Reset button on the dash
(on some models you may also need to depress the brake pedal)
Turn Ignition ON
Keep holding Trip Reset (and brake pedal) until the service indicator shows the appropriate interval
Release Trip Reset (and brake pedal)
Turn Ignition OFF
Turn Ignition back ON to confirm